WARMUP ALLIGATOR TESTER FOR HEATED FLOORS

The Alligator is a meter with six-inch alligator clips that allows the constant monitoring of the heating cable. By testing the electrical resistance (ohms) on the heating conductors and any leak to the ground, it provides the installer the guarantee of a job well done.

The Alligator will give clear and detailed status on the installation with the exact ohm measurements required for warranty filing for all floor heating products.

Floor Heating Multimeter

It is essential to test the cable before, during and after the floor heating system installation. The Alligator is a meter with six-inch alligator clips, that allows the constant monitoring of the heating cable. By testing the electrical resistance (ohms) on the heating conductors and any leak to the ground, it provides the installer the guarantee of a job well done.

THE ALLIGATOR MULTIMETER IS SIMPLE TO USE TOO.

By clipping the meter to the leads and turning on the device, it will remain accessible and powered all the way through the process, such as floor prep, tiling, and grouting.

Furthermore, anyone present on the job site, from the installer to the tile person, the manager or the general contractor, can double check the integrity of the system at any moment.

In addition, unlike the other testers, The Alligator will give clear and detailed status on the installation with the exact ohm measurements required for warranty filing for all floor heating products

Features:

Dual-use circuit or voltage tester
Circuit function make finding broken wires quick and easy
Alligator clips attach directly to the heating cables
Easily find a broken wire in a heated floor with the warmup digital multimeter
Cable tester for heated floors
Batteries included
Ohm meter constantly monitors the heating cables and gives the readings to ensure a safe installation
Connector clips straight to the heating cable